| Category
| | Series
| | Model
|
SUPPORT: MBT-H120 Bluetooth  Bluetooth Headset (MBT-H120) - How do I charge my Bluetooth headset?
- How long does it take to charge the battery?
- What is the talk time and standby time of my Bluetooth headset?
- What is the operating range for my Bluetooth headset?
- What does different color of LED indicator tell me about the status of my headset?
- How do I know if my headset is in low battery?
- How do I pair the headset with a Bluetooth phone?
- How do I answer or end a call?
- How do I make a call?
- How do I redial the last number?
- How do I reject an incoming call?
-
How do I charge my Bluetooth headset? top Connect one end of the AC adapter included in the package to the DC In jack on the headset and the other end to a wall outlet. -
How long does it take to charge the battery? top For first time use: Charge the battery for 24 hours before use
For normal use: Charge the battery for approximately 2.5 hours. Try to avoid charging the battery for over 24 hours.
-
What is the talk time and standby time of my Bluetooth headset? top Talk time: up to 5.5 hours
Standby time: 100 hours.
-
What is the operating range for my Bluetooth headset? top The operable range without obstructions is up to 10 meters (approximately 33 feet) between your headset and the Bluetooth devices
-
What does different color of LED indicator tell me about the status of my headset? top
While plugging in the charger:
| INDICATOR LED | HEADSET | | Light RED | Charging | | Light Out | Fully Charged |
While unplugging in the charger:
| Flash RED | Low Battery | | Flash Red–>Light out | Power off | | Flash Blue | Power on | | Flash Red and Blue Alternately | Pairing Mode |
| INDICATOR LED | HEADSET | | 1 Blue Rapid Flash Every 3 Seconds | Signal Available | | 2 Blue Rapid Flashes Every 3 Seconds | Connecting | | 3 Blue Rapid Flashes Every 3 Seconds | Connected | | 4 Blue Rapid Flashes Every 3 Seconds | Connected (on a call) |
-
How do I know if my headset is in low battery? top When the battery is low, the indicator LED will flash RED.
-
How do I pair the headset with a Bluetooth phone? top - Power on the headset
- Press the Volume Up button for approximately 4 seconds until the indicator LED starts to flash RED and BLUE alternately
- Search for Bluetooth devices by following the phones operating instruction
- Select MBT-H120 from the searched devices list and confirm
- Enter the passkey1234 and confirm
- After finishing the pairing process, the indicator LED will flash BLUE.
Please note: 1. Your headset can save the pairing information up to 8 phones but can connect to only 1 phone at a time.
2. If you want to use another Bluetooth phone with your headset, you need to switch off the headset and disconnect it form the previous phone. Next, pair with another phone and followed the instructions above.
-
How do I answer or end a call? top Press the Power/Talk button to answer or end a call.
-
How do I make a call? top Option 1: Use the keypad of your phone
Option 2: Use “Voice Dialing” function through your headset.
- Record Voice Tags in your phone book in advance
- Make sure this function of your phone has switched to on
- Press the Talk button of the headset, say the recorded name through the microphone of your headset
- After recognizing the correct voice tag, the number will be dialed automatically
Note: This feature is available only when a phone supports Voice Dialing. Please refer to the user guide of your phone.
-
How do I redial the last number? top Press the Volume Down button for approximately 2 seconds when no call is in progress.
-
How do I reject an incoming call? top Press the Power button for approximately 2 seconds to reject an incoming call.
|
|
|
|
|