1200UB PLUS  Windows XP Driver Installation
Print this page as a reference for driver installation.

In order to properly install the1200 UB PLUS Windows XP driver, the original driver must be removed first. Followthese steps below to remove the old driver (if you have attempted to installthis scanner before) and install the new version.

Step One - Disconnect theScanner

1. Make sure the scanner is not connected to the computer. Disconnect the scanner's USB plug from the USB socket.

Step Two - Remove thePrevious Driver Version (If you have previously attempted to install thescanner)

1. Click on Start, Programs, 1200 UB PLUS and select Uninstall. Follow the prompts to remove the original driver.

Step Three - Install the DownloadedWindows XP Driver and Panel Program.

1. Restart your computer 
2. After downloading ALL FILES for both the twain driver(1 through 7) and panel program(1 through 4) into the same folder, double-click the file web.exe to begin the installation and follow the installation prompts. 
3. When the twain driver installation is finished, you will be prompted to restart the computer. (IMPORTANT - do not restart computer between programs).
4. After installing the twain,  install the panel program by double clicking on up_libv13.EXE to extract files.
5. After the files have extracted please double click on UP_LIB.EXE this will begin the installation of the files. When this finishes restart the computer when prompted.
6. Once the computer has been restarted you will want to connect the scanner to the USB port on your computer.
7.  If you get a "Digital Signature Not Found" dialog box, click on "Yes" to continue with installation.